Brightside uses Polyflow 4000®, a unique polyurethane resin, which yields excellent flow and leveling characteristics as well as incredible abrasion and chemical resistance. Brightside also takes advantage of the latest in ultraviolet technology which insures longer color and gloss retention

Together these technologies create a one-part polyurethane which gives the look of a two-part polyurethane with the application ease of a one-part enamel.

With Toplac it is exceptionally easy to produce a superb finish with a brush or using the "roll and tip" method. Toplac can be used on fiberglass and suitably primed epoxy, wood and metal surfaces for hullsides and accent stripes. Use Toplac anywhere above the true waterline when long lasting performance and ease of application are desired.

Interdeck provides an excellent slip-resistant finish. It contains a fine aggregate and will apply easily on all substrates.

Ultra high-gloss finish with exceptional colour & gloss retention. Longest lasting results - contains a unique package of UV absorbers together with a chemically cured polyurethane resin system which protect against premature ageing. Exceptional durability - gives prolonged impact & abrasion protection even on the highest wear areas. Resistance to a wide range of chemicals including fuels, mild acids & detergents

They are easily applied straight from the can. A tough finish is achieved that normally lasts 2-3 years prior to recoating. Application conditions are not as critical as the high performance coatings but the temperature should be above 50°F (10°C).