Solid brass bus bar. Plated hardware resists corrosion. Moisture repellant bakelite insulator base. 4 gang. 3-7/8"L x 5/8"W x 27/32"H
Price:$ 6.95 / Each | |
| |
Heavy duty black molded bakelite base. Use with SFE or AGC fuses up to 20 amps. Brass fuse clips and 8-32 terminal screws. Available in 3 or 6 gang.
Price:$ 7.95 / Each |  |
|
Combination multiple gang fuse blocks with brass clips and screws. Can be used with 1/4" x 1 1/4" fuses for circuit distribution and also features separate grounding terminal bar. Fuses not included.
Comes in either 4, 6 or 8 gang panels
Price:$ 10.95 / Each | |
| |
Corrosion resistant construction. Moisture repellant bakelite insulator base. Nickel plated brass terminals and 8-32 screws. Protective insulator barrier strips. Rated for 30 Amps at 12V. Available in 4,6,8 and 10 gang.
Price:$ 3.59 / Each | |
|
Corrosion resistant construction. Moisture repellent bakelite insulator base. Solid brass buss bar. Brass 1/4" dia. stud terminals and hex nuts. Brass #8-32 terminal screws. Overall size: 5-3/4"L x 1-1/4"W x 1-1/32"H.
Price:$ 10.95 / Each | |
| |
Molded plastic base with brass hardware. Rated for 30 Amps at 12 volts. Available in 4 or 6 gang.
Price:$ 7.95 / Each | |
|
For safety each set of pins is sized differently so plugs cannot be set incorrectly. Made of machined brass with bakelite and neoprene cover. Available in 2,3 or 4 pin configurations.
Price:$ 6.95 / Pair | |
| |
Polarized 2 pin, 12 volt cable outlet. Chrome plated machined brass construction. Comes with deck outlet, plug and cap.
Price:$ 6.95 / Each | |
|
Clear insulating cover with label recess for standard Blue Sea Systems' labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fuses. Tin-plated copper buses and Phosphor Bronze fuse clips give 30 Ampere rating per circuit. Accepts AGC (Fast Acting), MDL (Time-Delay) and all other 3AG glass fuses. Available either with ground (negative) bus, or without ground bus.
Price:$ 32.95 / Each | |
| |
Closed back design completely insulates power from the mounting surface. Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits. Closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Jumpers allow creation of common circuits.
Available in 2, 4, 5, 8, 10, 12 circuit models.
Price:$ 3.29 / Each | |
|
Clear insulating cover with label recesses accept Small Format Labels Cover. Satisfies ABYC/USCG requirements for insulation. Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit. Accepts ATO and ATC fast acting blade fuses. 20 write-on circuit labels included. Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit. Accepts ATO and ATC fast acting blade fuses.
Available in 6 circuit or 12 circuit models.
Price:$ 39.95 / Each | |
| |
Clear insulating cover with label recesses accept Small Format Labels Cover. Satisfies ABYC/USCG requirements for insulation. Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit. Accepts ATO and ATC fast acting blade fuses. 20 write-on circuit labels included. Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit. Accepts ATO and ATC fast acting blade fuses.
Available in 6 circuit or 12 circuit models.
Price:$ 34.95 / Each | |
|
Heavy Duty black plastic molded base with brass ground bar. Interlocking feature allows blocks to snap together to create any number of circuits needed.
Available in 6 circuit or 10 circuit models.
Price:$ 16.95 / Each | |
| |
Connects multiple amperage cables securely. Bus continuous amperate 600 amps. 48 volts DC maximum. 3/8" studs.
Available in 4 stud or 8 stud models.
Price:$ 79.95 / Each | |
|
Small 100A tin plated copper bus for consolidating wires in tight places. Includes insulating cover. 5 8-32 screw terminals.
Price:$ 13.95 / Each | |
| |
Small 100A tin plated copper bus for consolidating wires in tight places. Includes insulating cover. 4 10-32" Stud terminals.
Price:$ 16.95 / Each | |
|
Combines negative and positive buses on one block. Continuous amperage of 100 amps. Maximum 48 volts DC. Screw terminal size is 10-32.
Choose from 2 versions: 5 gang or 10 gang terminal.
Price:$ 14.95 / Each | |
| |
The industry standard busbar for positive distribution. The industry standard busbar for the collection of negative or AC ground circuits. Comes with cover.
Continuous amperage rating of 150 Amps. Maximum rating of 48 Volts DC.
Price:$ 19.95 / Each | |
|
