Bilgekote protects bilges, lockers and bulkheads against moisture penetration and wear and tear. Contains a mildicide to combat mold, resists absorption of oil, gasoline and sludge into wood and fiberglass. Bilgekote will resist oil and fuel spillage and cleans easily. High opacity for excellent covering power. Available in white or gray.
Price:$ 21.95 / Each |  |
| |
Prekote is a unique V.O.C. compliant, single package, under coater for use with Brightside Polyurethane, Toplac, Yacht Enamels or any one-part topside finish. Microspheres are used to give Prekote superior build and hide while improving flow and sandability. PrekoteŽ is recommended anywhere above the true waterline where a coating is needed to provide a smooth, fair surface for overcoating with a topside enamel.
Price:$ 27.95 / Each | |
|
Epoxy Barrier-Kote is a multi-purpose two-part epoxy primer for use above the waterline. Epoxy Barrier-Kote is an excellent undercoater for Interthane Plus. It is used as a sanding surfacer to smooth rough lay-up and to resurface cracked and crazed gelcoat. Epoxy Barrier-Kote should also be used over clear epoxies to eliminate the effects of amine blush. Excellent undercoater for Perfection.
Price:$ 34.95 / Each | |
| |
Interprotect 2000 is a two part epoxy coating developed to protect new and used fiberglass hulls from water absorbtion. It can also be used to repair gelcoat blisters. Available in white or gray.
Price:$ 29.95 / Each | |
|
Interprotect 3000 is a unique two-part epoxy coating designed to offer many of the properties of Interprotect 2000 and meets the most restrictive V.O.C. regulations in the country. Interprotect 3000 is a high solids epoxy coating developed to protect old and new fiberglass hulls from water absorption.
Price:$ 44.95 / Each | |
| |
VC Tar2 is a 2-component epoxy primer providing osmosis protection to GRP boats and anticorrosive protection to steel and alloy surfaces. For use below water only.
Self-leveling to give an excellent finish
Easy to apply and overcoatable within hours
No sanding required between coats
Offers excellent barrier to water for osmosis protection and treatment
deal primer base for VC 17m antifouling
Price:$ 49.95 / Each | |
|
Do away with the need to sand before applying Interlux antifouling paint by using Interlux Fiberglass No Sand Primer YPA200. Fiberglass No Sand Primer is designed to eliminate the need to sand prior to applying antifouling paint to new or unpainted boats.
No sanding is required, before applying antifouling paint.
Perfect over Gelcoats, where sanding of the gelcoat may void hull warranties.
Less Labor intensive, only one coat of primer is required.
Strong chemical bond between primer and antifouling paint, when over coat window is meet.
Price:$ 29.95 / Each | |
| |
Interlux Outboard and Outdrive Aerosol Primer is formulated for use on underwater areas of aluminum outdrives and outboards, prior to application of Tri-Lux II, Tri-Lux II Aerosol or Micron 33 Aerosol. Outboard and Outdrive Aerosol Primer is a non bleeding, anticorrosive primer that provides an excellent barrier on metal surfaces, reducing galvanic corrosion.
Price:$ 19.95 / Each | |
|
Primocon is an anticorrosive primer for underwater metal surfaces (including hulls, running gear, and the lower units of outboards and I/O's).
Provides an excellent barrier to reduce pitting of the metal from galvanic corrosion. An excellent primer for antifouling paint over sanded fiberglass. Also suitable as a barrier/sealer coat over incompatible or unknown antifoulings
Price:$ 29.95 / Each | |
| | |
