For venting without spillage. Surge-free line causes automatic fuel nozzles to shut-off as the tank fills. With non-automatic nozzles: gurgle sound indicates tank is full. Installs in-line with tank vent systems that use 5/8" ID vent hose. Compact size for installation in small areas. Complete with hose clamps.
Price:$ 17.95 / Each | |
| |
Accommodates 5/8" (1.6cm) hose. Maximum hull thickness: 3/4" (1.9cm). Meets USCG Safety Standards.
23001: Reinforced black nylon with stainless steel screen flame arrestor.
23011: Chrome plated zinc vent with removable wire screen flame arrestor.
Price:$ 4.95 / Each |  |
|
Highly polished chrome plated brass. Two vent holes, Monel fire screen. Fits standard 9/16" or 5/8" (1.4cm or 1.59cm) vent hose. Maximum hull thickness 1/2"(1.27cm)
Price:$ 10.95 / Each | |
| |
| Patented splash-resistant, corrosion-resistant polypropylene. Meets ABYC ventilation specifications. All Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations. Fits standard 5/8" hose
Price:$ 6.95 / Each | |
|
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. For 5/8" I.D. hose. Meets ABYC Standard.
Price:$ 10.95 / Each | |
| |
Eliminates the need to install a fuel line vent and a surge protector-now one product helps avoid fuel spills, provides fuel tank venting, and resists water intrusion into the fuel system. Meets ABYC Standards.
Operates in any orientation within 45° of vertical. Withstands oil, gas, alcohol-blended fuels. Constructed of glass-filled polypropylene.
Inertia of surging fuel drives the surge ball up against the upper seat, closing the large vent opening. Passage is limited to the smaller openings, which reduce fuel flow and minimize spillage. When the tank becomes full it causes automatic fuel nozzles to shut off. Without fuel inertia, the surge ball remains at rest, allowing unrestricted venting through all openings. Baffles and traps help prevent water from entering vent line and fuel tank during normal sea conditions and washdowns.
Price:$ 19.95 / Each | |
|
316 stainless steel alloy flush mount. Smooth edge, no protruding cap to cause damage or be damaged by hull bumps. Cap unscrews with hex head wrench for easy cleaning of filter. Hose size ID is 5/8".
Price:$ 16.95 / Each | |
| |
| Chrome plated bronze with removable 30 mesh, monel wire screen flame arrester. Designed to meet the requirements of the National Fire Protection Association Booklet No. 302, Section No.323 on vent pipe outlets. Also meets the requiements of the USCG safety standards of January 31, 1977 for gasoloine fuel systems. The 1/2" NPT female thread is off center to create a water baffle.
Neck length is 1-1/2".
OD neck is 1-3/16".
OD flange is 2-1/2".
Price:$ 29.95 / Each | |
|
| Chrome plated bronze with removable 30 mesh monel wire screen flame arrester. Available in 2 sizes:
5/8" hose, maximum hull thickness 3/4"
3/4" hose, maximum hull thickness 5/8"
Price:$ 29.95 / Each | |
| |
| Chrome plated bronze. Removable 30 mesh stainless steel wire screen flame arrestor. Fits 1/2 inch threaded female pipe fitting. 5/8 inch hull thickness.
Price:$ 36.95 / Each | |
|
No-Spill is a fuel resistant bottle designed for temporary attachment to the hull, over the fuel tank vent, while fueling. It captures fuel spilled from the vent when the tank reaches a full level, fuel that would otherwise stain the hull and run into the water. No-Spill attaches to the hull using two super strong suction cups. Designed for use with gasoline or diesel fuel. Fits all boats with fuel tank vents up to 1.5" (3.8 cm) in diameter.
Price:$ 22.95 / Each | |
| | |
