For emptying oil from inboard and I/O engines. Made of solid brass with removable tubing for ease of operation and cleaning. Designed to fit engine dipstick tube.
Price:$ 17.95 / Each | |
| |
Provides clean method of emptying oil from inboards and inboard/outboard engines. Fits into dipstick tube of engines. Chemical resistant plastic pump and removable pliable tubes.
Price:$ 22.95 / Each | |
|
| Provides a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" chuck can be operated. Drill Pump Kit is complete with Garden hose Port Adapters and 1/4" X 40" Probe plus 3' of 1/2" hose. For changing oil through a dipstick tube. Pumps up to 3.4 gpm (13 lpm).
Self-priming to 3ft (1m).
1/4" (6.5mm) diameter shaft.
Supplied with 3/4" Garden hose thread port adapters.
Includes accessories for Oil Changing.
Price:$ 33.95 / Each | |
| |
Suck Up creates a powerful vacuum in the self-contained tank. Just place the hose in the liquid and pump it! In seconds the liquid is vacuumed out. Anywhere! Anytime!
Changing oil on boats and recreational motors has never been easier or more environmentally clean. Proper disposal and clean-up is a snap. Use it to get rid of trapped liquids in your car, boat, plane, RV, house. All types of liquid can be removed, even those with grit, shavings and sand. It's perfect for winterizing!
Holds 2.5 gallons. Direct draw, no impeller or motors. All parts clean with soap and water.
Price:$ 69.95 / Each | |
|
| Ideal for small engine and gearbox oil drain. Simply pump old oil out with dipstick probe. Oil and corrosion resistant brass neoprene construction with up to 1 gpm (4 lpm) output. Small enough to fit any tool box. Uses include bilge pumping, oil draining, diesel fuel transfer, and many other liquid transfer applications. Long life brass cylinders, high-quality oil resistant plungers, intake and discharge caps are used.
NOTE: Oil temperature should not exceed 140° F.
Cylinder 1-1/4"
Stokes Per Gallon 40
Stroke Length 4-5/8"
Overall Length 10-1/4"
Hose Connection 1/2"
Hose Supplies - 2' of 1/2" - 40" of 1/4
Price:$ 36.95 / Each | |
| |
Takes the work out of changing oil. Simply insert tube into engine dip stick receptacle, and discharge tube into refuse container. Pumps 1/2 gallon per minute. Connects to 12 volt battery with wire clips provided. Must Pre-warm oil before changing.
Price:$ 19.95 / Each | |
|
Durable, molded pump housing. Built-in battery cord storage chamber. Includes a variety of hoses, fittings and female adapter for most out-drive dipsticks. Resealable, re-usable storage bag included.
Price:$ 39.95 / Each | |
| |
Makes quick, clean and easy oil chanes onboard any boat because it uses the vessels own power supply to operate the powerful oil pump.
Price:$ 179.95 / Each | |
|
Now there is no need to worry about top heavy packaging or spills from openings on the container. This 3-1/2 gallon (13 ltr) compact self-contained unit has a self-priming diaphragm pump with an easy pour spout for emptying. This new design allows the unit to be stowed easily in deck boxes, boat storage lockers or RV storage compartments. The unit comes with a dipstick suction tube, battery clamp leads and an on-off switch to make the pumping process simpler and easier.
3-1/2 gallon (13 ltr) sealed container
Compact Design
Easy Pour Spout
Easy to carry handle
Self priming, run dry pump design
Empties oil @ rate of .5 GPM at temperature
Price:$ 129.95 / Each | |
| |
Comes complete with all the necessary hoses and oil storage container. Simply install the oil probe in the engine oil dipstick tube, attach the battery clips and flip a switch. Oil is safely removed and stored in the easy to carry container.
Price:$ 149.95 / Each |  |
|
Ideal for transferring diesel fuel or oil. Self priming to about three feet and can pump a discharge head up to thrity feet. Pump head can be rotated in 90 degree increments on motor. 12VDC. Ports are NPT internal and 1" external hose.
Price:$ 249.95 / Each | |
| |
Ideal for transferring diesel fuel. Self priming to about three feet and can pump a discharge head up to twenty feet with an integral on-off reversing switch. Pump head can be rotated in 90 degree increments on motor. 12VDC
Price:$ 229.95 / Each | |
|
| Transfers hot or cold oil quickly and cleanly. Available in 2 versions, OIL and DIESEL. Both pumps generate up to 15 PSI.
Specs
Fuse protected motor
Chrome plated brass casing
Easily changed gasket & impeller
3 way directionally oriented switch with safety lock
Ports: exterior: 3/4" male garden hose. interior 3/8" Female NPT
3 GPM; Head 10'; self priming to 3'
Price:$ 199.95 / Each | |
| |
| Pump oil change system with 3-valve manifold. Manifold systems change oil on mulitple engines, generators, transmissions.
Specs:
2.5 GPM
10' Head
Self Priming
1/2" NPT manifold ports
Hoses sold seperately
Price:$ 499.95 / Each | |
|
