| Provides a water exit for boats with self-bailing cockpits. Acetal construction. Accommodates 3875B thru-transom thru-hull connector (screw holes must be drilled for installation.) Diameter: 2 3/4". Can be used as a stand alone scupper or also used as a replacement valve for ATT 38811 Thru-Transom Scupper.
Price:$ 6.49 / Each | |
| |
| The rubber flapper opens to drain water out and closes to prevent backwash. Acetal construction. For 1-1/2" I.D. hose. Specifications:
Max hull thickness: 2 5/8"
Overall length: 6 1/4"
Installation hole diameter: 2"
Price:$ 15.95 / Each | |
|
| The Scupper Flap is tough, flexible material with a molded V-groove to reduce backwash. Fasteners are concealed and corrosion-proof. For 1-1/2" ID exhaust hose and transoms to 3" thick. Rugged Stainless Construction
Cast from certified #316 Stainless Steel alloy for strength and lifetime corrosion-resistance. Thick steel sidewalls withstand continual stress and hose flexing. Faster, Simpler Installation
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal. One installer can tighten all connections from inside the hull. Barbed tail ends provide plenty of room to hold multiple clamps. Specifications: Thread length: 3 1/2" Barb length: 1 1/2" Overall length: 5 1/2" Max Hull Thickness: 2"
Price:$ 49.95 / Each | |
| |
Cast bronze with rubber check ball. Comes complete with key. For use when discharge is below waterline.
Angle of outlet is 45 degrees.
Screw size is #8. Available in 2 sizes:
1" hose with 3 1/4" flange
1 1/2" hose with 3 3/4" flanges
Price:$ 99.95 / Each |  |
|
| Molded white plastic. Flush mount. For use when discharge is above waterline. Insert prevents passge of large objects without restricting water flow. Hose size is 1-1/2". Maximum hull thickness is 1-3/4". OD flange is 2-3/4". ID is 1-1/2".
Price:$ 11.95 / Each | |
| |
High impact fiberglass reinforced white plastic ring with rubber flap and gasket. For boats with self bailing cockpits. Mounts on transom above water line. 2-7/8" Diameter. Fastens with #6 screws.
Price:$ 3.95 / Each | |
|
| Automatically seals and drains self bailing decks. Made of clear polycarbonate material. Solid polyethylene ball and PVC seal mounts on transom above water line. Available in 2 sizes:
Small- Fits 3/4" to 1 1/2" openings
Large-Fits 1 1/2" to 3" openings Sold 1 per pack
Price:$ 10.95 / Each | |
| |
| This cockpit scupper drain provides an inexpensive alternative to items currently available for draining areas where the discharge is below waterline. This injection molded part is high strength and UV stabilized to provide value and durability. The check ball contained inside the cockpit scupper drain is molded and then ground smooth and round to provide better sealing against reverse water flow that occurs when backing boat. The overall diameter of the mounting flange is 3 9/16". The cockpit scupper drain requires a 2 1/2" diameter hole for installation and mounts with four (4) number 8 screws (not furnished). Top of cockpit scupper drain is removable for cleaning. Fits 1 1/2" hose.
Price:$ 39.95 / Each | |
|
Prevents backwash. Made of chemical resistant materials. Available in 3 sizes:
3/4" hose
1 1/8" hose
1 1/2" hose
Price:$ 15.95 / Each | |
| | |
