| This cast aluminum offset type jack plate is designed for clamp-on mount outboard motors up to 35 HP. The Mini-Jacker allows mounting of long shaft motors to shorter shaft transom boats. The mini-jacker stands off transom 4". The engine mounting surface is 11 1/2" wide x 10" high and features a vertical offset of 3". The overall width of transom mounting flanges is 17".
150 lb maximum capacity
35 HP maximum
Price:$ 89.95 / Each | |
| |
This tough 3/8" thick aluminum bracket provides an inexpensive solution to mounting a long shaft outboard to a short transom. Also great as a fixed jack plate for all V6 outboards. Handles all outboards up to 200 hp. Three engine mounting holes and two transom mounting holes combined with a 3" designed lift allows a total of 5 1/2" of lift with a full four (4) inches of setback.
Price:$ 119.95 / Each | |
|
This plate is constructed of tough 3/8" aircraft aluminum and features a design that allows full tilt with dual steering. Polished aluminum finish resists corrosion. All bolts are stainless steel with brass nuts to prevent galling. Fits all V-4 and V-6 engines to a maximum of 150 Horsepower. Provides six (6) inches of setback and four (4) inches of vertical adjustment.
Price:$ 179.95 / Each | |
| |
This plate is constructed of tough 3/8" aircraft aluminum and features a design that allows full tilt with dual steering. Powder coated black finish resists corrosion. All bolts are stainless steel with brass nuts to prevent galling. Fits all V-4 and V-6 engines to a maximum of 150 Horsepower. Provides six (6) inches of setback and four (4) inches of vertical adjustment.
Price:$ 289.95 / Each | |
|
This top selling plate features a solid one-piece design that allows quick and easy adjustment of plate height with the turn of a single bolt from the top. Our unique locking bars inside allow the side locking bolts to be adjusted from the outside with a single wrench. Manufactured from 3/8" rugged aircraft aluminum stock, this plate can handle the stresses from all V-6 outboards. Our new "wide side" design adds a full 2" of material in the adjustment slot area for additional strength. Unit features all stainless hardware with brass nuts to prevent galling. Full four inches of vertical adjustment.
Price:$ 279.95 / Each | |
| |
| "HP" for high performance, this new high strength design jacking plate meets the strenuous requirements of the latest high performance outboards including the toughest four-strokes. Designed with all the features of our popular Pro Hi-Jacker™ series, but from full 1/2" aircraft aluminum stock. Our new "wide side" design adds a full 2" of material to the adjustment slot areas on the side of the plate for additional strength. To top it off, we have highly polished the plate to a "mirror finish" look for beauty. Will handle all V-6 outboards including the new 4-strokes.
Standard features Include:
Solid one-piece design
Single bolt adjustment from the top
Stainless steel bolts with brass nuts
Locking bars inside for one-wrench adjustment
Full four-inch vertical adjustment
Price:$ 329.95 / Each | |
|
| This all new design features an all enclosed hydraulic pump that contains the lift cylinder and fluid in one compact unit. No hydraulic hoses to run, no reservoirs to install, no hoses to drill. Simply mount to the transom and connect to power. The Hydro-Jacker™ is notched at the top to allow most steering cylinder units to clear the plate when fully tilting the engine. Two sets of mounting holes on both the transom and engine side gives additional options to mounting. Anodized sides and top retain clean looks even in salt water. Easily handles all V6 outboards, even the heaviest of the new 4-strokes.
6" Setback
Price:$ 849.95 / Each | |
| |
| This all new design features an all enclosed hydraulic pump that contains the lift cylinder and fluid in one compact unit. No hydraulic hoses to run, no reservoirs to install, no hoses to drill. Simply mount to the transom and connect to power. The Hydro-Jacker™ is notched at the top to allow most steering cylinder units to clear the plate when fully tilting the engine. Two sets of mounting holes on both the transom and engine side gives additional options to mounting. Anodized sides and top retain clean looks even in salt water. Easily handles all V6 outboards, even the heaviest of the new 4-strokes.
8" Setback
Price:$ 899.95 / Each | |
|
| This all new design features an all enclosed hydraulic pump that contains the lift cylinder and fluid in one compact unit. No hydraulic hoses to run, no reservoirs to install, no hoses to drill. Simply mount to the transom and connect to power. The Hydro-Jacker™ is notched at the top to allow most steering cylinder units to clear the plate when fully tilting the engine. Two sets of mounting holes on both the transom and engine side gives additional options to mounting. Anodized sides and top retain clean looks even in salt water. Easily handles all V6 outboards, even the heaviest of the new 4-strokes.
10" Setback
Price:$ 999.95 / Each | |
| |
| Bolt kit for mounting outboard engine to jacking plates.
Kit contains:
4 each 1/2"-13 x 3" long bolts - stainless steel
4 each 1/2"-13 lock nuts - brass with nylon insert
8 each 1/2"-flat washers - stainless steel
Price:$ 24.95 / Each | |
|
