No-Spill, the right product to help protect our waters and the animals and plants that live there. Fuel resistant bottle for temporary attachment to the hull. Attaches to hull with two strong suction cups. Use with gasoline or diesel fuel. Fits all boats with fuel tank vents up to 1.5" (3.8 cm) in diameter Captures fuel often spilled from the vent when the tank reaches a full level, fuel that would otherwise stain the hull and run into the water. Spilling fuel into U.S. waters is illegal - and bad for the environment. Any fuel spilled is captured, to be disposed of properly after fueling.
Used to install all Moeller below deck polyethylene fuel tanks. The fuel fill system and thru hull ventilation system is included, as well as all necessary parts for installation. Contains 18" of 1 1/2" USCG Approved Type A fuel fill hose 3' of 5/8" USCG Approved vent hose Deck plate fuel fill Thru hull vent 6 Hose clamps
Container allows the addition of the exact amount of oil required for a 2 cycle engine. Oil marks are in gallons and liters. easily determine ratios for 100:1, 50:1, 24:1 and 10:1 mixes.
To meet the needs of a return line found on diesel and some fuel injection engines, Moeller's patent-pending design ensures all needs are met. Adjustable for 6" to 24" deep tanks.
Swingarm Mechanical Sending Units with a direct sight gauge or with the conversion capsule gathers fuel level information with the float. While accurate, the gauge will fluctuate as the fuel in the tank "slosh" around the tank when boating because of the moving parts - the float.
