Made of solid teak for motors up to 12 h.p. only. Fits 7/8" or 1" railings. 6-5/8"W x 6-7/8"H x 1-1/2" thick
Price:$ 54.95 / Each | |
| |
White polypropylene (HDPE)
Lifetime warranty
For motors up to 12 h.p. only
Fits 7/8 inch or 1 inch railings
6-5/8 inches wide x 6-7/8 inches high x 1-1/2 inches thick
Price:$ 69.95 / Each | |
|
Fixed height mount for an auxiliary or trolling motor. Tough 18-8 stainless steel brackets. 1 1/2" thick, 8" wide mounting plate. For motors up to 15 HP
Price:$ 79.95 / Each | |
| |
Adjustable angle. Permanent fixed height mount with built in transom angle and trim adjustment for auxiliary or trolling motors. Tough 304 stainless steel brackets. 1 1/2" thick, 8" wide waterproof laminated mounting board. For motors up to 15HP.
Price:$ 89.95 / Each | |
|
Fixed height mount for an auxiliary or trolling motor. Tough 18-8 stainless steel brackets. 1 1/2" thick, 8" wide mounting plate. For motors up to 15 HP
Price:$ 89.95 / Each | |
| |
For 2 stroke motors up to 20 hp. long or short shaft 4 Running positions. All aluminum components with stainless steel springs and polypropylene motor board. Stainless steel fasteners included. Rated for 2 strokes up to 20HP and 4 strokes up to 5HP.
Price:$ 159.95 / Each | |
|
Designed for 4 stroke motors. Extra wide 11 1/2" mounting board. Safety cable included. 5 Vertical running positions.
H.P. Rating: Over 7 1/2 to 25
Motor Weight Not to Exceed: 118 lbs.
Vertical Travel*: 11 1/4" (29cm)
Poly Mounting Pad
Mounting Board Dimensions W x H x T: 11 1/2" x 10 3/4" x 2" (29 x 27 x 5cm)
Mounting Bracket Dimension W x H: 7 5/8" x 7 7/8" (19 x 20cm)
Price:$ 279.95 / Each | |
| |
Easier to lift and lower - Stainless Springs help counterbalance motorweight. Transom mount locks and holds motor up or swings down for propulsion. Built in transom angle adjustment for optimum motor perfomance. Black poly mounting board. 4 position locking height adjustment
Price:$ 159.95 / Each |  |
|
Easier to lift and lower - Stainless Springs help counterbalance motorweight. Transom mount locks and holds motor up or swings down for propulsion. Built in transom angle adjustment for optimum motor perfomance. Black poly mounting board. 4 position locking height adjustment
Price:$ 199.95 / Each | |
| |
| Raise and lower trolling and auxiliary motors on power and sailboats with ease. Built especially for new 4 Stroke, heavier, high torque motors. Extra Wide 11 1/2" (29cm) Black Poly Mounting Board for new, wider style motor locking clamps used on late model outboard motors.
H.P. Rating: Over 7 1/2 to 30
Motor Weight Not to Exceed: 169 lbs.
Vertical Travel*: 9 1/2” (24cm)
Poly Mounting Pad
Mounting Board Dimensions W x H x T: 10 3/4” x 12” x 2” (27 x 30 x 5cm)
Price:$ 289.95 / Each | |
|
| Raise and lower trolling and auxiliary motors on power and sailboats with ease. Built especially for new 4 Stroke, heavier, high torque motors. Extra Wide 11 1/2" (29cm) Black Poly Mounting Board for new, wider style motor locking clamps used on late model outboard motors.
H.P. Rating: Over 7 1/2 to 25
Motor Weight Not to Exceed: 175 lbs.
Vertical Travel*: 15 1/2” (39cm)
Poly Mounting Pad
Mounting Board Dimensions W x H x T: 11 1/2” x 10 3/4” x 2” (29 x 27 x 5cm)
Price:$ 389.95 / Each | |
| |
It attaches quick and easily. Small outboard motors up to 3HP can be mounted on either port or starboard side. Sturdy aluminum mount and clamping device, on strong 1" heavy plate tubing is adjustable to fit most types of canoes.
Price:$ 89.95 / Each | |
|
Leverage tool for use with manual tilt motors. Tilts motor back easier with less strain. Made of heavy gauge 1" diameter anodized aluminum tubing. Cushioned contact points.
Price:$ 59.95 / Each | |
| |
Secures motors to the boat. 700# tensile strength cable is covered with tough, clear poly-vinyl. Utilizes heavy duty rust resistant swivel snap. 48" long.
Price:$ 22.95 / Each | |
|
Universal trolling motor bracket for clamp-on type trolling motors. Designed for motor to be removed when boat is under engine power or being trailered. Made of cast aluminum with seasoned wood mounting block. Maximum thrust of 36 pounds.
Price:$ 44.95 / Each | |
| |
| Kicker Pad is a neat and inexpensive outboard motor mounting pad. Allows dinghy motor to be securely clamped to the stern rail. Made of marine ABS plastic with stainless steel fasteners.
Fits 1" rails.
Price:$ 29.95 / Each | |
|
