|
|
|
Shopping
|
|
|
 | |
Gelcoats & Gelcoat Repair
|
|
| The quality Imarine laminating gel coat to permanently repair or replace original, high-glass finish. The product cures to a tacky finish for re-coating. Evercoat Mold Release (# 105685) must be used to attain a fully cured surface. Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat. Gel Kote is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness. Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Acetone (10%) to thin for sprayer applications.
Available in white or neutral color. (use neutral color if you need to tint to obtain color)
Price:$ 19.95 / Each |  |
| |
The highest quality marine finish gel coat to permanently repair or replace original, high-glass finish. The product cures to a hard finish and does not require Evercoat Mold Release to attain a fully cured surface. Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat. One Step Finish Gel Coat is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness. Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Acetone (10%) to thin for sprayer applications.
Price:$ 24.95 / Each | |
|
Special one part gel-coat, repairs surface imperfections in less than one hour. No sanding or hardener required. Contains 1/2 oz of patch, and application tool. Repair fiberglass boats, bathtubs, shower stalls and hot tubs. Easy permanent repairs on hairline cracks, small scratches and chips in fiberglass. This one part formula does not need a catalyst. Just fill in the crack, let is set and scrape off the excess with the enclosed spreader. It is just that easy. Clear Scratch Patch is ideal for surface scratch repairs of metal flake finish.
Price:$ 9.95 / Each | |
| |
Neutral color gel-coat paste for permanent repairs. Neatly covers all surface imperfections. No run gel paste is easy to work with on vertical surfaces. Match colors with coloring agents sold seperately. Hardener included.
Price:$ 19.95 / Each | |
|
Everything you need to repair and color match your damaged gel coat. Quickly repairs scrapes, scratches and gouges in gel coat finishes. Special no run polyester gel and release paper makes a glass hard, no-sand finish in less than one hour. Contains 2 oz resin, hardener and six blendable color additives to match any finish.
Price:$ 26.95 / Each | |
| |
Permanently repair nicks, gouges, and scratches in fiberglass hulls and decks. A special release film and no-run polyester gel makes a slick, no-sand finish quick and easy. Each kit contains all primary pigment colors (6 total), 4 oz. polyester gelcoat paste, hardener, release film, mixing sticks, a blending chart, and instructions. Mix the colors directly against hull or deck for a perfect match. Also works well for repairing countertops, appliances, and bathroom tubs and sinks. Cures to a glass hard finish in one hour.
Price:$ 39.95 / Each | |
|
| For filling pin holes, scratches or other surface defects on hulls. White color minimizes the possibility of color showing through the final coat as can happen when using colored putties beneath white paint. Easy sanding, fast drying, spreads easily and has low shrinkage. 21 oz tube.
Price:$ 21.95 / Each | |
| |
| A fast drying compound that is ideally suited for filling fastener holes, shallow gouges and for fairing minor imperfections in bare wood or fiberglass prior to painting. Surfacing Putty is for use on unpainted surfaces above the waterline only. Pint can. White.
Price:$ 21.95 / Each | |
|
|
|
| . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
|
|
 Discount Marine Supplies
PO Box 180
Hershey, PA 17033
United States
Ph: 7174891458
e-mail: orders@discountmarinesupplies.com
Powered by Fortune3 E-Commerce Corp.
Shopping Cart Software
|
|
|
|
