The Garelick Fender Hangers allow you to locate, raise and lower boat fenders wherever needed-easily! Eliminates tying and untying fender lines. Simple locking lever automatically locks fender line in place at desired height. Made of tough, glass reinforced nylon. Handles lines up to 3/8" diameter.
Price:$ 13.95 / Each | |
| |
Perko Fender locks are a chrome plated zinc eye attaches permenantly to fender line. Low profile backing plate attaches to inner hull of boat. 2 per pack.
Price:$ 12.95 / Pair | |
|
The latest in fender brackets made of marine grade reinforced nylon. Clamps securely onto 7/8" and 1" round rail tubing and 3/16" and 1/4" life line wire. Unique double locking action locks clamp onto rail or wire and still allows full adjustment of the height of the fender. When the proper height is reached the final locking action clamps the rope quickly and securely. 2 per pack.
Price:$ 9.95 / Pair | |
| |
Sea Dog Fender Hooks are a chrome plated brass hook containing a snap type mechanism to firmly grasp lines up to 3/8". 1 per pack
Price:$ 3.49 / Each | |
|
Seafarer chrome plated brass fender cleat is designed to accept fender lines up to 3/8". 2" long. Base is 1 1/16" x 1 9/16". 1 per pack.
Price:$ 4.95 / Each | |
| |
Easily attach fenders where required using Taylor's stainless steel fender locks. Attach stainless steel plates where fenders will hang. Attach nylon peg to fender with rope. Simply slide nylon peg into low profile fender holder for easy hanging. 1 set per pack (1 plate and 1 peg).
Price:$ 2.49 / Each |  |
|
Keep loose lines and power cords neatly in place. Durable PVC mounting band snaps over any rail, lifeline or stanchion. Snap the bottom section around your coil of rope or cord to secure.
Price:$ 8.95 / Each | |
| |
Universal mounting and easily adjustable fender hanger. Durable PVC mounting band snaps over any rail, lifeline or stanchion. Slide hanging rope through adjusting buckle, loop rope back and pull down to secure. To adjust, pull up on buckle and pull rope to desired length. 1 PER PACK
Price:$ 10.95 / Each | |
|
Injection molded polyethylene clamp brackets mount securely to your 3/16"to 1/4"lifelines. Use for hanging fenders, holding power cords etc... Use on 3/16"- 1/4"Rope. Sold in pairs
Price:$ 7.95 / Pair | |
| |
Rail mount UV resistant vinyl strap securely holds rope, cords, etc. Available in 2 sizes: for standard rails or for large rails.
Price:$ 7.95 / Each | |
|
Made from injection molded, high impact and UV- resistant nylon. This unique design makes it easy to adjust fender heights and locks in place with a jam cleat - no knots. Uses 1/4"to 1/2" line.
Price:$ 6.95 / Each | |
| |
Made from UV resistant vinyl with stainless steel hardware, Polyform's fender adjuster is easy to use. Adjust fender height instantly, with no knots. Accepts fender lines up to 5/8 inch in diameter.
Price:$ 9.95 / Each | |
|
Makes placing fenders easy. Eliminates tying/untying fender lines. Instant self-locking action works automatically to raise and lower the fender and hold it securely in place. Snaps around rails. Accommodates up to 1/2'' diameter line. White Vinyl strap.
Price:$ 15.95 / Each | |
| |
Use this Davis accessory to clip your fenders to rails, lifelines, side wing windows or cleats. Fender Tender II simplifies the handling and relocation of boat fenders. The "Railing Lock" firmly grasps rails from 7/8" to 1" (22 to 25 mm) diameter. New "Lifeline Lock" provides added safety. Use 1/4" to 3/8" (6 mm to 9 mm) diameter nylon line. Made of tough, sun-resistant plastic.
Price:$ 10.95 / Each | |
|
| A quick and easy way to adjust the height of your fenders! Simply loop through fender, pull strap through buckle to desired length and secure. Made from 3/4"Polyester webbing with UV protection and Marine grade Hook & Loop fasteners.
36" Long, sold in pairs.
Price:$ 7.95 / Pair | |
| |
Injection molded polyethylene clips that mount securely to your 7/8"railings. Use for hanging fenders, holding power cords etc... Sold in pairs
Price:$ 7.95 / Pair | |
|
