Gelcoats & Gelcoat Repair
Gelcoats & Gelcoat Repair
BOAT REPAIR PRODUCTS Gelcoats & Gelcoat Repair

CLEAR COTE MARINE GELCOAT
CCTGELCOAT - CLEAR COTE MARINE GELCOAT
Professional grade marine gelcoat with wax. Includes MEK-P catalyst. Color is white.
Price: $ 12.95

Click to Configure
FIBERGLASS EVERCOAT MARINE GEL COAT
FIB105673 - FIBERGLASS EVERCOAT MARINE GEL COAT
The quality Imarine laminating gel coat to permanently repair or replace original, high-glass finish. The product cures to a tacky finish for re-coating. Evercoat Mold Release (# 105685) must be used to attain a fully cured surface. Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat. Gel Kote is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness. Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Acetone (10%) to thin for sprayer applications.

Available in white or neutral color. (use neutral color if you need to tint to obtain color)

Price: $ 19.95

Click to Configure
FIBERGLASS EVERCOAT ONE STEP GEL COAT
FIB105670 - FIBERGLASS EVERCOAT ONE STEP GEL COAT
The highest quality marine finish gel coat to permanently repair or replace original, high-glass finish. The product cures to a hard finish and does not require Evercoat Mold Release to attain a fully cured surface. Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat. One Step Finish Gel Coat is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness. Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Acetone (10%) to thin for sprayer applications.
Price: $ 24.95

Click to Configure
 
EVERCOAT GEL COAT SCRATCH PATCH
FIB565 - EVERCOAT GEL COAT SCRATCH PATCH
Special one part gel-coat, repairs surface imperfections in less than one hour. No sanding or hardener required. Contains 1/2 oz of patch, and application tool. Repair fiberglass boats, bathtubs, shower stalls and hot tubs. Easy permanent repairs on hairline cracks, small scratches and chips in fiberglass. This one part formula does not need a catalyst. Just fill in the crack, let is set and scrape off the excess with the enclosed spreader. It is just that easy. Clear Scratch Patch is ideal for surface scratch repairs of metal flake finish.
Price: $ 9.95

Click to Configure
EVERCOAT POLYESTER GEL PASTE
FIB 100695 - EVERCOAT POLYESTER GEL PASTE
Neutral color gel-coat paste for permanent repairs. Neatly covers all surface imperfections. No run gel paste is easy to work with on vertical surfaces. Match colors with coloring agents sold seperately. Hardener included.
Price: $ 19.95

EVERCOAT SEA CARE GEL COAT REPAIR KIT
FIB 108000 - EVERCOAT SEA CARE GEL COAT REPAIR KIT
Everything you need to repair and color match your damaged gel coat. Quickly repairs scrapes, scratches and gouges in gel coat finishes. Special no run polyester gel and release paper makes a glass hard, no-sand finish in less than one hour. Contains 2 oz resin, hardener and six blendable color additives to match any finish.
Price: $ 26.95

 
EVERCOAT GEL COAT MATCH & PATCH REPAIR KIT
FIB 100668 - EVERCOAT GEL COAT MATCH & PATCH REPAIR KIT
Permanently repair nicks, gouges, and scratches in fiberglass hulls and decks. A special release film and no-run polyester gel makes a slick, no-sand finish quick and easy. Each kit contains all primary pigment colors (6 total), 4 oz. polyester gelcoat paste, hardener, release film, mixing sticks, a blending chart, and instructions. Mix the colors directly against hull or deck for a perfect match. Also works well for repairing countertops, appliances, and bathroom tubs and sinks. Cures to a glass hard finish in one hour.
Price: $ 35.95

MMM 05962 - 3M ACRYL MARINE PUTTY GEL COAT REPAIR PUTTY
For filling pin holes, scratches or other surface defects on hulls. White color minimizes the possibility of color showing through the final coat as can happen when using colored putties beneath white paint. Easy sanding, fast drying, spreads easily and has low shrinkage.

21 oz tube.

Price: $ 21.95

INTERLUX 257 SURFACING PUTTY
INT 257P - INTERLUX 257 SURFACING PUTTY
A fast drying compound that is ideally suited for filling fastener holes, shallow gouges and for fairing minor imperfections in bare wood or fiberglass prior to painting.

Surfacing Putty is for use on unpainted surfaces above the waterline only. Pint can. White.

Price: $ 21.95

 
HI-BOND WAXED WHITE GEL COAT
HIB1480 - HI-BOND WAXED WHITE GEL COAT
White Gel Coat used over fiberglass surfaces. This product is designed to cure to a tack-free finish. Sanding is required between coats where applicable. Contains Wax-Sol. Hardener included.
Price: $ 17.95

Click to Configure
HI-BOND UN-WAXED NEUTRAL COLOR GEL COAT
HIB1540 - HI-BOND UN-WAXED NEUTRAL COLOR GEL COAT
Neutral base exterior Gel Coat is un-pigmented for use with polyester pigments. Hardener included.
Price: $ 23.95

Click to Configure
11 Items Found in BOAT REPAIR PRODUCTS Gelcoats & Gelcoat Repair   
.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  
Discount Marine Supplies
PO Box 180
Hershey, PA 17033
United States
Ph: 7174891458
e-mail: orders@discountmarinesupplies.com
 
HI-BOND UN-WAXED NEUTRAL COLOR GEL COAT
Neutral base exterior Gel Coat is un-pigmented for use with polyester pigments. Hardener included.

Price: $ 23.95 / Each
Add to cart Enlarge
3M ACRYL MARINE PUTTY GEL COAT REPAIR PUTTY
For filling pin holes, scratches or other surface defects ...

Price: $ 21.95 / Each
Add to cart Enlarge

 
search> contact>  


 
 
Powered by FORTUNE3 • shopping cart software