Standard M80-M120 kit with Electronic Indicator Control

Backed by nearly 40 years of trim tab experience, Bennett Sport Tabs are engineered for the demands of offshore attitude correction. Performance boats that are run at speeds of 60 mph require the rugged construction and enjoy the  sophisticated black powder coated finish of Sport Tabs. Manufactured with heavy gauge reinforced stainless steel and powerful dual hydraulic actuators, Sport Tabs combine strength, durability, and good looks to achieve your boat's maximum potential.

Sport Tabs feature heavy gauge stainless steel construction and include rocker switch helm control. Backed by 1 year warranty. Designed for use around 60 MPH. Uses only 12" of transom per side. Sport tab package contains trim tabs, hydraulic power unit, actuating cylinders, all necessary wiring, tubing, hardware and one page installation instructions.

Bennett M Series Trim Tabs are the newest innovation from Bennett the worldwide leader in trim tabs. Available in 2 size:M-80 for boats 17' to 20' and M-120 for boats 20' to 23'.

Designed For Smaller Boats  

Batwing design provides 30% more lift, while small enough to fit small transoms

Quick-connect tubing for easy installation.  

*Free installation video  

Improves Boat Performance  

Get out of the hole and on plane quickly  

Improve fuel efficiency by 20-30%  

Increase speed  

Corrects for listing and uneven weight distribution  

Pull more/heavier skiers. 

Available in 2 size:M-80 for boats 17' to 20' and M-120 for boats 20' to 23'

*5-year warranty

Backed by nearly 40 years of trim tab experience, Bennett Sport Tabs are engineered for the demands of offshore attitude correction. Performance boats that are run at speeds of 60 mph require the rugged construction and enjoy the  sophisticated black powder coated finish of Sport Tabs. Manufactured with heavy gauge reinforced stainless steel and powerful dual hydraulic actuators, Sport Tabs combine strength, durability, and good looks to achieve your boat's maximum potential.

Sport Tabs feature heavy gauge stainless steel construction and include rocker switch helm control. Backed by 1 year warranty. Designed for use around 60 MPH. Uses only 12" of transom per side. Sport tab package contains trim tabs, hydraulic power unit, actuating cylinders, all necessary wiring, tubing, hardware and one page installation instructions.

Controls sold separately.

Know The Position Of Your Trim Tabs! Bennett Tab Positon Indicator (TPI) accurately indicates the position of each trim tab adding precision and confidence to trim tab operation. The TPI helm display accurately shows deflection percentage of each trim tab, and the LED brighness is adjustable for any lighting condition. They are easily retrofitted to existing Bennett Trim Tabs, and can be adapted to Boat Leveler brand Instatrim systems. The TPI keeps you fully informed for maximum efficiency, performance, and total control of your trim tab system.

Bennett Auto Tab Retractor automatically retracts tabs when boat's ignition is turned off. Trailer boats have added defense from trim tab damage with them "full-up" during hauling, trailering and storage. Assures trim tabs are all the way up every time boat is started if boat is not equipped with trim tab indicators. Easily installs behind instrument panel. Operates Bennett and Boat Leveler systems.

Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position. Fluid flows through a concealed hole in the upper hinge at the top of the actuator - thus eliminating external hoses subject to damage.
A1101A is the standard 13 3/4" long
A1101EX is an external line connection used in cases of total inaccessibility inside the transom. 13 3/4" long
A1200S designed for installations where space is limited. 11 3/4" long.

Also available are replacement upper and lower hinges as well as hinge pins.

A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance. Installs easily with sturdy mounting bracket.

Measures 4" x 7 1/2" x 5 1/2". Uses automatic transmission fluid. Includes pump, solenoid valves, reservoir and cover.

This control is ergonomically designed, water resistant and provides a positive “click” when the trim tabs are engaged. Its lock-out feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into any existing Bennett 2 ½-inch Rocker Switch hole.

Three features combined into one sophisticated control — the popular Bennett rocker switch control, trim tab indicator and the Auto Tab Retractor. Water resistant, highly accurate and features variable intensity LEDs for night or day. Features a relay module mounted near the transom, which simplifies installation by reducing the number of wires to run to the helm.

Standard kit includes:

• EIC Display (EIC001)
• EIC Relay Module (EIC101)
• Sensor with 10’ SC Red and Connector (EIC901P)
• Sensor with 10’ SC Green and Connector (EIC901S)
• EIC Cable (EIC201)
• EIC Pigtail Pack (EIC401)
• EIC Hardware Pack (EIC501)

Get a Perfectly Trimmed Boat - Every Time!

Bennett Marine pioneered the Auto Tab Control (ATC) to make the boater’s experience on the water even better. It does exactly what it says it does – interacting directly with your trim tab system to automatically monitor your boat’s position and maintain the perfect cruising attitude. Note that the Auto Tab Control does not replace a manual control required for your trim tab system.

Major Benefits:

• Saves you money on fuel. A properly trimmed boat can significantly lower fuel costs in a single season of usage.
• Easy to install - just plug and play! Very few tools are needed for installation, and everything plugs right into the ATC Control Unit.
• No more guesswork - it trims the boat better than you can. Calculating more than a thousand attitude readings per second, the ATC adjusts your trim tabs to changes in vessel speed, sea conditions and shifting weight.
• The most comfortable ride you’ve ever had on your boat. Maintain the best cruising attitude without the need to constantly work manual trim controls.

Lenco to Bennett Conversion Kit
Economical, easy installation alternative to replacing Lenco actuator or purchasing an entire trim tab system. Uses existing Lenco trim planes. No need to patch or re-drill mounting holes. Bennett Euro-Style Rocker Switch Control fits and covers existing Lenco switch cutout.

Lenco to Bennett Conversion Kit Includes:
• Custom adapter plates for actuator and trim plane assembly
• Bennett Hydraulic Power Unit
• Water resistant Euro-Style Rocker Switch Control, hardware and all wiring

See the position of your trim tabs on your NMEA 2000 compatible multi-function display or gauge, GPS/chartplotter or sonar. Display not included in kit. One-year warranty.
Kit includes:
1. White plastic clip - used to snap on actuator piston shaft when installing new upper hinges with sensors
2. Red butt connectors - used to connect sensors with the NMEA1 Module
3. NMEA1 Module - connects Bennett trim tab sensors to NMEA-compatible electronics
4. Upper Hinges with coil (1 with red sensor wire and 1 with green sensor wire) - measure trim tab position
5. Two sensor rods - measure trim tab position

Includes two 3" brass pipe nipples, two brass female elbows, two tube bending clips, six #14 x 1 1/2" full threaded screws, four 1/4-20 x 3/4" machine screws, eight nylon hangers, one mounting bracket w/four #10 x 1" full-threaded screws, and two nuts w/ferrules.

304 grade stainless steel. Transom mount. Includes plane only. Sold individually.

304 grade stainless steel. Transom mount. Includes trim plane, hinge and backing plate. Sold individually.