The products listed below may contain additional information viewable by clicking on the item image. Products which have a button contain variables such as size or color and by clicking on the product image you will be able to view additional information as well as the options available for purchase.
Products which have a button can be added directly to your cart or you can click the image for additional product information.
Constructed from marine quality bronze and stainless steel for ruggedness and
reliability.
Flow rate: Nominal 80 Litres/min (17.8 gallons/min) at
1500rpm Self-priming from dry up to 2.4m (7.8ft)
Easy to service and maintain.
Inexpensive to buy and operate.
Will tolerate abrasive wear (this may affect performance - seek advice
from your distributer).
Handles hard and soft solids without clogging.
Can pump in either direction.
Will not airlock.
Ports: 1" NPT Internal Weight: 5-3/4 lb (2.61 kg) 26 gpm (98 lpm) at
10ft (3m) total head at 1750 rpm. Self-priming to 10ft(3m) vertical lift.
Lip seal or mechanical face seal. Double-row ball bearing.
Available with Neoprene or Nitrile Impellers.
Please click on the View Options button to view available options or to
place an order.
Flow rate: Nominal 40 Litres/min (8.9 gallons/min) at
1500rpm Self-priming from dry up to 2.4m (7.8ft)
Constructed from marine quality bronze and stainless steel for ruggedness and
reliability.
Easy to service and maintain.
Inexpensive to buy and operate.
Will tolerate abrasive wear (this may affect performance - seek advice
from your distributer).
Handles hard and soft solids without clogging.
Can pump in either direction.
Will not airlock.
11.3 gpm (43 lpm) at 10ft (3m) total head at 1750 rpm. Self-priming to
10ft(3m) vertical lift. Lip seal. IPT port 1/2" Diameter 5/8" Two
single row ball bearings. Takes impeller neoprene 12100001
Please click on the View Options button to view available options or to
place an order.
Flow rate: Nominal 20 Litres/min (4.4 gallons/min) at
1500rpm Self-priming from dry up to 1.5m (4.9ft)
Constructed from marine quality bronze and stainless steel for ruggedness
and reliability.
Easy to service and maintain.
Inexpensive to buy and operate.
Will tolerate abrasive wear (this may affect performance - seek advice
from your distributer).
Handles hard and soft solids without clogging.
Can pump in either direction.
Will not airlock.
5.8 gpm (22 lpm) at 10ft (3m) total head at 1750 rpm. Self-priming to
10ft(3m) vertical lift. Lip seal. IPT Port 3/8" Diameter 1/2" Two
single row ball bearings. Takes impeller# 186730001
Please click on the View Options button to view available options or to
place an order.
Crusader Engine Cooling Fits most pre: 1993 Crusader Engines.
Accepts Crusader drive pulley. Bolts directly to stock mounting bracket.
Wearplate and seal can generally be replaced without removing the pump
shaft. Takes impeller 189480001
Pedestal pumps are for engine cooling, washdown, circulation and other
general purposes. Corrosion resistant bronze. Bronze or Stainless steel shaft.
Permanently lubricated ball bearings
Please click on the View Options button to view available options or to
place an order.
Pedestal pumps are for engine cooling, washdown, circulation and other
general purposes. Corrosion resistant bronze. Bronze or Stainless steel shaft.
Permanently lubricated ball bearings. 1 1/4 Universal Pump with neoprene
impeller, full cam and mechanical seal.
Shaft Seal: Carbon-Ceramic Face Type Bearing: Pre-lubricated Double
Row Ball Ports: 1-1/4" (32mm) NPT Internal Weight: 10-1/2 lb (4.8 kg)
Approx. 62 gpm (235 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft(3m) vertical lift. Mechanical face seal.
Double-row ball bearing.
Please click on the View Options button to view available options or to
place an order.
All are bronze body, bearing housing and stainless steel shaft. Can
directly replace Sherwood models G-30-2 on current Chris Craft production
engines and G-5 on current Chrysler engines. May fit some models of Volvo,
Escort, Pleasurecraft and Datsun engines. For most current and late model
Chrysler gasoline engines and LM-318X-LM-240X, Lehman 302, 351 and Powerhouse
Marine 302, 351 engines.
1 1/4" ports
Body Materials
Bronze
Impeller
Neoprene
Wearplate
Not fitted
Bearings
Twin single row, ball type
Port Type
1-1/4" (32mm) ID Hose
Shaft Material
Stainless Steel
Seal
Carbon-Ceramic Face Type
Pulley
6-1/2" Full Grip “A” Belt
Weight
7 (lb) 3.2 (kg)
Please click on the View Options button to view available options or to
place an order.
Replacement for stock cast-iron, plastic and aluminum composite water pumps.
Made of bronze and stainless steel, this pump withstands harsh, corrosive marine
environments. 1 piece body makes occasional impeller or seal replacement easy.
Includes replaceable cam and wearplate so that pump can be overhauled to like
new condition.
Body: Bronze, One-piece Impeller: Jabsco Neoprene Shaft:
Stainless Steel Ports: 1-1/4? Hose Barb Seal: Lip Type Bearings:
Sealed Ball Type Shipping Weight: 7 lb (3,2 kg) Left or Right Hand
Rotation. Bronze end plate. Replaceable cam and wearplate.
Please click on the View Options button to view available options or to
place an order.
Electrically activated clutch pump offers all the beneifts of flexible
impeller pumps with substantial flow rate and horizontally oriented ports. Good
for pumping bilges, washdowns, circulating water in bait tanks or as a utility
dockside pump.
Flow rate: Nominal 23 USgallons/min (88 Litres/min) at
1750rpm Self-priming from dry up to 2.4m (7.8ft)
Constructed from marine quality bronze and stainless steel for ruggedness
and reliability.
Easy to service and maintain.
Inexpensive to buy and operate.
Will tolerate abrasive wear (this may affect performance - seek advice
from your distributer).
Handles hard and soft solids without clogging.
Can pump in either direction.
Will not airlock.
Body Materials
Bronze
Impeller
Nitrile
Wearplate
Replaceable
Shaft Material
Stainless steel
Seal
Carbon/ceramic mechanical type
Bearings
Twin row, ball type
Port Type
1" NPT
Clutch Type
Electro-magnetic 12 VDC
Pulley
178mm (7") 'A' or 'B' section
Weight
15 (lb) 6.8 (kg)
Please click on the View Options button to view available options or to
place an order.
Electrically activated clutch pump offers all the beneifts of flexible
impeller pumps with substantial flow rate and horizontally oriented ports. Good
for pumping bilges, washdowns, circulating water in bait tanks or as a utility
dockside pump.
Flow rate: Nominal 62 USgallons/min (234 Litres/min) at
1750rpm Self-priming from dry up to 2.4m (7.8ft)
Constructed
from marine quality bronze and stainless steel for ruggedness and reliability.
Easy to service and maintain.
Inexpensive to buy and operate.
Will tolerate abrasive wear (this may affect performance - seek advice
from your distributer).
Handles hard and soft solids without clogging.
Can pump in either direction.
Will not airlock.
Body Materials
Bronze
Impeller
Nitrile
Wearplate
Replaceable
Shaft Material
Stainless steel
Seal
Carbon/ceramic mechanical type
Bearings
Twin row, ball type
Port Type
1 1/4" NPT
Clutch Type
Electro-magnetic 12Vdc
Pulley
178mm (7") 'A' or 'B' section
Weight
19.5 (lb) 8.9 (kg)
Please click on the View Options button to view available options or to
place an order.
button contain variables such as size or color and by clicking on the product image you will be able to view additional information as well as the options available for purchase. 
button can be added directly to your cart or you can click the image for additional product information. 
