NOTE: Oil temperature should not exceed 140° F.
Cylinder 1-1/4"
Stokes Per Gallon 40
Stroke Length 4-5/8"
Overall Length 10-1/4"
Hose Connection 1/2"
Hose Supplies - 2' of 1/2" - 40" of 1/4

Comes complete with all the necessary hoses and oil storage container. Simply install the oil probe in the engine oil dipstick tube, attach the battery clips and flip a switch. Oil is safely removed and stored in the easy to carry container.

Install oil probe in engine oil dipstick tube, attach the battery clips, flip a switch. Oil is safely and neatly removed and stored in the easy to carry container. Use for oil chanes, bilge cleanup or other fluid transfers of liquid between 40 and 185 degrees F.

Please click on the View Options button to view available options or to place an order.

The Jabsco Oil Change System is designed to beinstalled in a vessel’s engine room with its manifold and valves permanently plumbed to the vessel’s engines’ oilpans or transmissions’ oil sumps. The manifold is factory fitted with three ball valves to serve three different oilreservoirs and may be fitted with two additional ballvalves to drain up to five oil reservoirs. The system canbe used to remove old oil from an engine or transmissionthen reversed, with the integral reversing switch, to pumpa measured amount of new oil back into the engine ortransmission. Each connection to an engine is controlled by a dedicated full flow ball valve. The system’s coverprovides an attractive appearance, fully shrouding the entire pump and manifold system.

Size is 5 1/4" High, 10 7/8" Wide and 11" Deep.

Specs
Fuse protected motor
Chrome plated brass casing
Easily changed gasket & impeller
3 way directionally oriented switch with safety lock
Ports: exterior: 3/4" male garden hose. interior 3/8" Female NPT
3 GPM; Head 10'; self priming to 3'

Please click on the View Options button to view available options or to place an order.