4" Diameter

?Faria Speedometers do NOT come as a complete kit, pitot and tubing are sold seperately.

2" Diameter

Faria Chesapeake gauges are perimter lighted with polished stainless steel bezel and domed glass lens. Available in black with white and blue letters or white with black and blue letters.

Choose from 4 gauge kit or 6 gauge kit in black or white.

4 Gauge kit includes:

7000 RPM Tachometer, 55 MPH Speedometer with Pitot and hose, fuel gauge, and voltmeter

6 Gauge kit includes:

6000 RPM Tachometer, 55 MPH Speedometer with Pitot and hose, fuel gauge, voltmeter, OIl pressure and water temperature.

4" Diameter

4" Diameter

2" Diameter

2" Diameter

2" Diameter

2" Diameter

2" Diameter

4" Diameter

?Faria Speedometers do NOT come as a complete kit, pitot and tubing are sold seperately.

4" Diameter

?Faria Speedometers do NOT come as a complete kit, pitot and tubing are sold seperately.

Constructed from marine quality bronze and stainless steel for ruggedness and reliability.

Flow rate: Nominal 80 Litres/min (17.8 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)

• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.

Ports: 1" NPT Internal
Weight: 5-3/4 lb (2.61 kg)
26 gpm (98 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft(3m) vertical lift.
Lip seal or mechanical face seal.
Double-row ball bearing.

Available with Neoprene or Nitrile Impellers.

Please click on the View Options button to view available options or to place an order.

Flow rate: Nominal 40 Litres/min (8.9 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)

Constructed from marine quality bronze and stainless steel for ruggedness and reliability.

• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.

11.3 gpm (43 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft(3m) vertical lift.
Lip seal.
IPT port 1/2" Diameter 5/8"
Two single row ball bearings.
Takes impeller neoprene 12100001

Please click on the View Options button to view available options or to place an order.

Flow rate: Nominal 20 Litres/min (4.4 gallons/min) at 1500rpm
Self-priming from dry up to 1.5m (4.9ft)

• Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.

5.8 gpm (22 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft(3m) vertical lift.
Lip seal.
IPT Port 3/8" Diameter 1/2"
Two single row ball bearings.
Takes impeller# 186730001

Please click on the View Options button to view available options or to place an order.

Flow rate: Nominal 20 Litres/min (4.4 gallons/min) at 1500rpm
Self-priming from dry up to 1.5m (4.9ft)

• Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.

Ports: 1/4" NPT Internal
Weight: 1-1/2 lb (0.7 kg) approx.
3.7 gpm (14 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft(3m) vertical lift.
Lip seal.
Neoprene impeller.
Double-row ball bearing.

Takes impller #45280001P

Please click on the View Options button to view available options or to place an order.

Pedestal pumps are for engine cooling, washdown, circulation and other general purposes. Corrosion resistant bronze. Bronze or Stainless steel shaft. Permanently lubricated ball bearings

Please click on the View Options button to view available options or to place an order.

Flow rate: Nominal 200 Litres/min (44.4 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)

2 Versions available. 6400-0004 is a universal application and 64001051 is a replacement for Catarpillar Engines.

Constructed from marine quality bronze and stainless steel for ruggedness and reliability.

• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock. .

Wearplate: Replaceable
Shaft Seal: Carbon-Ceramic Face Type
Bearing: Pre-lubricated Double Row Ball
Ports: 1-1/4" (32mm) NPT Internal
Weight: 10-1/2 lb (4.8 kg) Approx.
62 gpm (235 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft(3m) vertical lift.
Mechanical face seal.
Double-row ball bearing.

Please click on the View Options button to view available options or to place an order.

Pedestal pumps are for engine cooling, washdown, circulation and other general purposes. Corrosion resistant bronze. Bronze or Stainless steel shaft. Permanently lubricated ball bearings. 1 1/4 Universal Pump with neoprene impeller, full cam and mechanical seal.

Shaft Seal: Carbon-Ceramic Face Type
Bearing: Pre-lubricated Double Row Ball
Ports: 1-1/4" (32mm) NPT Internal
Weight: 10-1/2 lb (4.8 kg) Approx.
62 gpm (235 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft(3m) vertical lift.
Mechanical face seal.
Double-row ball bearing.

Please click on the View Options button to view available options or to place an order.

Replacement for Sherwood G-21 on Pleasurecraft engines. 1" Port size.

Flow rate: Nominal 40 Litres/min (8.9 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)

• Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
• Easy to service and maintain.
• Alternator mount
• Pulley Drive

Please click on the View Options button to view available options or to place an order.

.

1 1/4" ports

Please click on the View Options button to view available options or to place an order.

Replacement for stock cast-iron, plastic and aluminum composite water pumps. Made of bronze and stainless steel, this pump withstands harsh, corrosive marine environments. 1 piece body makes occasional impeller or seal replacement easy. Includes replaceable cam and wearplate so that pump can be overhauled to like new condition.

Body: Bronze, One-piece
Impeller: Jabsco Neoprene
Shaft: Stainless Steel
Ports: 1-1/4? Hose Barb
Seal: Lip Type
Bearings: Sealed Ball Type
Shipping Weight: 7 lb (3,2 kg)
Left or Right Hand Rotation.
Bronze end plate.
Replaceable cam and wearplate.

Please click on the View Options button to view available options or to place an order.

Electrically activated clutch pump offers all the beneifts of flexible impeller pumps with substantial flow rate and horizontally oriented ports. Good for pumping bilges, washdowns, circulating water in bait tanks or as a utility dockside pump.

Flow rate: Nominal 23 USgallons/min (88 Litres/min) at 1750rpm
Self-priming from dry up to 2.4m (7.8ft)

• Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.

Please click on the View Options button to view available options or to place an order.

Electrically activated clutch pump offers all the beneifts of flexible impeller pumps with substantial flow rate and horizontally oriented ports. Good for pumping bilges, washdowns, circulating water in bait tanks or as a utility dockside pump.

Flow rate: Nominal 62 USgallons/min (234 Litres/min) at 1750rpm
Self-priming from dry up to 2.4m (7.8ft)

Constructed from marine quality bronze and stainless steel for ruggedness and reliability.

• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.

Please click on the View Options button to view available options or to place an order.

The Verna Ski was developed for ski boat applications. The design is based on the Vernatone family of inline mufflers. Available with straight inlet or 45" angled inlet.

Application: Ski Boats
Fuel type: Gas only
Waterline: Above only
Sound rating: Good

The Vernatone? exhaust muffler is the original FRP water-cooled marine muffler. This style has been used by boat builders and boaters world wide for over 40 years. The Vernatone family of inline mufflers includes eight basic products with hundreds of variations in length, width, height, inlets and outlets. Builders and boaters requested these variations for specific engine or location requirements in a particular vessel. These mufflers also vary in size which influences the acoustical performance.

Application: All Inboards
Fuel type: Gas/Diesel
Waterline: Above only
Sound rating: Good

Available in Several Sizes. Please click item to view additional information.

The Vernalift muffler was designed originally for small auxiliary propulsion engines installed near or below the water line in sailboats. In the early 70?s the quieting capabilities of lift mufflers were recognized. The Vernalift family expanded to include new and larger engines.

Application: Inboards, Sailboats & Generators
Fuel type: Gas/Diesel
Waterline: Above or Below
Sound rating: Better

Please click on view options button to view a specification chart of available sizes.

The Vernalift muffler was designed originally for small auxiliary propulsion engines installed near or below the water line in sailboats. In the early 70?s the quieting capabilities of lift mufflers were recognized. The Vernalift family expanded to include new and larger engines.

Application: Inboards, Sailboats & Generators
Fuel type: Gas/Diesel
Waterline: Above or Below
Sound rating: Better

Please click on view options button to view a specification chart of available sizes.

For use where there is a shortage of space or V Drive Applictions. For Gas/Diesel fuel type. Above waterline use only.

Application: V Drives and shortage of space
Fuel type: Gas/Diesel
Waterline: Above only
Sound rating: Fair

Please click on view options button to view a specification chart of available sizes.

This insulating fiberglass tape is the proper way to contain the heat radiated by hot manifolds, exhaust pipes and mufflers. Simply wrap the tape around the manifold, exhaust pipe or muffler and secure.

Available in 100' rolls. 2" wide or 3" wide.