AWLGRIP 545 ANTI-CORROSIVE EPOXY PRIMER: D8001(White) & D1001(Gray) A two component epoxy primer with corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates. Also used to seal filler primers, and fairing work before applying topcoats. May be applied by spray, brush, or roller. May be used above or below the waterline.

This is a two part system. You must order the base primer in either gray or white along with the D3001 Converter in the appropriate size. The mix ratio is 1:1 so if you purchase 1 quart of primer you also need 1 quart of converter for a total of 2 quarts. Additionally you need to purchase the appropriate reducer (spray or brush) for spraying reduce up to 25% with T0006 and for brushing reduce up to 10% with T0031.

M3066 COLD CURE Accelerator for 545 Epoxy Primer
COLD CURE Accelerator for 545 Primer reduces cure and recoat times for 545 Primer by as much as 50%. Add up to 12 1/2% of catalyzed volume of 545 Primer, replacing that amount of standard reducer. Use between 50 F and 75 F This product available in pints only.