AWLGRIP 545 ANTI-CORROSIVE EPOXY PRIMER: D8001(White) & D1001(Gray) A
two component epoxy primer with corrosion and adhesion properties for steel,
aluminum, wood, and fiberglass substrates. Also used to seal filler primers, and
fairing work before applying topcoats. May be applied by spray, brush, or
roller. May be used above or below the waterline.
This is a two part system. You must order the base primer in either gray or
white along with the D3001 Converter in the appropriate size. The mix ratio is
1:1 so if you purchase 1 quart of primer you also need 1 quart of converter
for a total of 2 quarts. Additionally you need to purchase the appropriate
reducer (spray or brush) for spraying reduce up to 25% with T0006 and for
brushing reduce up to 10% with T0031.
M3066 COLD CURE Accelerator for 545 Epoxy Primer
COLD CURE
Accelerator for 545 Primer reduces cure and recoat times for 545 Primer by as
much as 50%. Add up to 12 1/2% of catalyzed volume of 545 Primer, replacing that
amount of standard reducer. Use between 50 F and 75 F This product available in
pints only.
Please click on the View Options button to view available options or to place
an order.
| 
